Elinchrom EL Skyport Computer Remote and Trigger Set 1xTransm,2xTransc
The Elinchrom RX Computer Remote/Trigger Set gives you complete remote control of any Elinchrom RX flash unit, as well as remote triggering for other flashes by Elinchrom or other manufacturers. By using the included SPEED Transmitter and the SPEED USB RX with EL-Skyport software installed on any Mac or Windows computer, you can maintain total control over any RX strobes using the Transceiver RX (2 included). The EL-Skyport software also offers additional features, such as the programmable Flash Delay, Flash-Counter, and other control features.
To control flash power, modeling lamp on/off, and flash synchronization requires only the Transceiver RX and the SPEED Transmitter. Using a Universal receiver (not included) will allow you remote triggering for other flash units (Elinchrom or otherwise). The Transceiver RX requires no battery, just plug it into a Style RX, Digital RX or Ranger RX flash unit. The Transmitter uses a 3V lithium battery (CR2430), which is included.
Key Features
- SLR camera sync speeds: SPEED mode up to 1/250s, STANDARD mode 1/160 - 1/200s
- 5 selectable trigger modes, (4 Groups + All)
- 8 frequency channels
- 40 bit security encryption
- Up to 60 m range indoors for standard mode and up to 40 m in SPEED mode
- Up to 120 m range outdoors for standard mode and up to 60 m in SPEED mode
- Battery life up to 6 months--over 30,000 flashes
- Full remote control with the Ranger Quadra RX (Only Ranger Quadra RX with serial numbers from 4001 onwards) built-in EL-Skyport Receiver
- Full remote control with all Elinchrom RX units; Style RX 300/600/1200, Digital RX 1200/2400, Ranger RX/Ranger RX Speed/Ranger RX Speed AS, using the ELS Transceiver RX. Note: The Ranger RX Battery power packs require the EL-Skyport Transceiver RX Adapter (19374)
- The EL-Skyport Software is available as a "Free Download" in our "Support" section
- RX-feature buttons (Remote Control)
- Test trigger button and feature button
- Integrated hotshoe (middle contact) improved
- SYNC-socket for direct connection improved
- Two flash modes, standard and SPEED
- The "Standard" mode is fully compatible with previous EL-Skyport versions
- The SPEED function is available for Ranger Quadra AS, BXRi 250/500 and D-Lite-it and all other units, when used with the Universal Speed
- Status LED for EL-Skyport mode and battery status
- Improved housing, battery drawer and switches
- New hotshoe with screw-lock
- New extra features; configure EL-Skyport with the new EL-Skyport PC/MAC software 3.0 (available for free download here)
What's Included:
- Skyport SPEED Transmitter
- Sync Cable for Skyport Radio Slave Transmitter - 7.8"
- 2 x EL-Skyport Transceiver RX
- EL Skyport USB RX SPEED Transceiver
- 3V Lithium Battery (CR2430)
- Limited Warranty
