NTG-2 shotgun microphone
NTG-2 shotgun microphone
NTG-2 shotgun microphone
NTG-2 shotgun microphone
  • Rental ID: R303555-C • Webcode: 221953
Product Highlights
  • Shotgun Microphone
  • Shotgun Pickup Pattern
  • XLR Connection
  • Wired
Available in Calgary, Edmonton, Mississauga and Ottawa
Buy this for: $369.00 Learn More

Overview

The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles.

The NTG-2 comes complete with mount and windshield.The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.

Key Features

  • Super Cardioid.
  • Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave.
  • Maximum SPL: 131dB
  • Broadcast sound quality
  • Rugged metal contruction.
  • Condenser microphone transducer.
  • Weighing 161 grams approx. (5.17 oz).
  • Low noise circuitry.
  • Low handling noise.
  • Supplied with stand mount and zip pouch.

What's Included

  • ZP2 (zip pouch)
  • RM5 (stand mount)
  • WSVM (windshield)

Product Specifications

Detailed Specifications
Features
  • Broadcast sound quality
  • Rugged metal construction
  • Condenser microphone transducer
  • Weighing 161 grams approx. (5.17 oz.)
  • Low noise circuitry
  • Low handling noise
  • Designed & manufactured in Australia
  • Full 2 year guarantee.
Operation power

The NTG-2 is designed to operate from standard P48 phantom power or a 1.5 V Alkaline Battery. The NTG-2 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.
Operation output impedance

The NTG-2 will operate satisfactorily into a load impedance as low as 1 k§Ù. If a load below this is used, the output signal level will be reduced. The NTG-2¡¯s output is balanced between pin 2 (hot) and pin 3 (cold). Pin 1 is ground.
Acoustic principle Line plus Gradient
Directional pattern Super-Cardioid
Frequency range 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
Output impedance 250 Ù - phantom power, 350 Ù - battery power
Signal noise ratio din iec 651 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
Equvalent noise 18 dB SPL (per IEC651, IEC268-15)
Maximum spl 131 dB (@ 1% THD into 1 kÙ)
Sensitivity -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651 113 dB (per IEC651, IEC268-15)
Power supply voltage 1.5 V Alkaline Battery or P48 Phantom
Current consumption 2.0 mA
Battery life >400 hours with fresh alkaline battery
Output connection 3 pin XLR, balanced output between pin 2(+), 3(-) and Pin 1 (ground)
Weight with battery 161 g approx. (5 oz.)
Dimensions width 278 mm
Dimensions depth 22mm
Dimensions height 22mm