• GND Graduated Neutral Density Filters
• Reduces Contrast Differences in Composition
• Lee Filter 100mm Filter Holder Compatible
• 3-Filter Set
• Set includes 0.3ND,0.6ND,0.9ND These three filters adjust exposure without affecting colour balance and can be used with all standard film types.

82mm Wide Adapter Ring for Lens Hood 82mm wide angle adapter ring attaches to lens to accomodate the lens hood.

• Compatible with SW150 Filters
• Fits up to 2x Filters
• Rotating Design This has been specially designed for supported ultra-wideangle lenses and comes assembled with two filter slots and a Lightshield.

77mm Adapter Ring for Lens Hood Adaptor rings fit into the lens to accommodate the filter holder. Once the adaptor is in place the filter holder clips firmly to it using a smooth, quick-release, spring loaded mechanism.

• ND Neutral Density Filter
• 6 Stop Reduced Exposure
• 64x Filter Factor
• 100 x 100mm (4 x 4) Filter Size
• Allows for Use of Wider Aperture
• For use with Lee Filters 100m Filter Holder At six stops, the Little Stopper is ideal for those low-light conditions at the beginning and end of the day (when the Big Stopper's ten stops may prove too much), allowing you to enjoy increased flexibility with exposure lengths.

SW150 Adapter for Nikon AF-S 14-24mm Lens The Adaptor consists of a front ring, a compressor ring and a locking ring specifically designed for the Nikon AF-S Nikkor 14-24mm f/2.8G ED lens.

67mm Adapter Ring for Lens Hood 67mm wide adapter ring sturdily constructed with an aluminum screw thread.

77mm Wide Adapter Ring for Lens Hood Adaptor rings fit into the lens to accommodate the filter holder. Once the adaptor is in place the filter holder clips firmly to it using a smooth, quick-release, spring loaded mechanism.

• Lens Caps for Lee Adapter Ring
• Protects Adapter Ring and Lens While Changing Filters This lens cap allows you to leave the adaptor ring attached at all times whilst keeping the front element clean and safe.

• CPL Circular Polarizer Filter
• Prevents Reflection & Glare
• Increases Colour & Tonal Saturation
• 150 x 150mm (6 x 6) Filter Size
• For use with Lee Filters SW150 Mark II Filter Holder If used alone, the polariser can be placed into the filter holder and the holder rotated until the desired effect is achieved. If used with a grad filter, the grad should be positioned first, then the polariser added.

• Shields Lens From Glare
• Rotates Independently

• ND Neutral Density Filter
• 15 Stop Reduced Exposure
• 32,000x Filter Factor
• 150 x 150mm (6 x 6) Filter Size
• Allows for Use of Wider Aperture
• For use with Lee Filters SW150 Mark II Filter Holder The Super Stopper is a neutral density filter that reduces the light entering your lens by 15 stops.

72mm Wide Adapter Ring for Lens Hood Adaptor rings fit into the lens to accommodate the filter holder. Once the adaptor is in place the filter holder clips firmly to it using a smooth, quick-release, spring loaded mechanism.

60mm Hasselblad Adapter Ring for Lens Hood Adaptor rings fit into the lens to accommodate the filter holder. Once the adaptor is in place the filter holder clips firmly to it using a smooth, quick-release, spring loaded mechanism.

• ND Neutral Density Filter
• 10 Stop Reduced Exposure
• 1000x Filter Factor
• 150 x 150mm (6 x 6) Filter Size
• Allows for Use of Wider Aperture
• For use with Lee Filters SW150 Mark II Filter Holder The Big Stopper is a neutral density filter that reduces the amount of light entering your lens by ten stops.

• Fits 100mm System Filters on 86mm Lenses
• Compatible with 100mm Filters 86mm adapter ring for Lee Filters drop in holder system

72mm Adapter Ring for Lens Hood Adaptor rings fit into the lens to accommodate the filter holder. Once the adaptor is in place the filter holder clips firmly to it using a smooth, quick-release, spring loaded mechanism.

• ND Neutral Density Filter
• 6 Stop Reduced Exposure
• Filter Material Glass
• 2.3 mm (0.1) Filter Thickness The Little Stopper is a neutral density filter that reduces the light entering your lens by six stops, ideal for those low-light conditions at the beginning and end of the day, allowing you to enjoy increased flexibility with exposure lengths.

• Fits 100mm Systems Filters on 105mm Lenses
• Compatible with 100mm Filters It sits in front of the lens's front thread. The standard adaptor ring is compatible with lens focal lengths of approximately 24-28mm (35mm SLR equivalent) and upwards.