• 100 x 100mm (4 x 4) Filter Size
• ND Neutral Density Filter
• 10 Stop Reduced Exposure
• 1,000x Filter Factor
• Allows for Use of Wider Aperture
• For use with Lee Filters 100m Filter Holder A glass filter that reduces exposure by approximately 10 stops.

• LEE100 Filter Compatibility
• Holds up to 3x Filters
• 360° Rotation

• GND Graduated Neutral Density Filters
• Reduces Contrast Differences in Composition
• Lee Filter 100mm Filter Holder Compatible
• 3-Filter Set
• Set includes 0.3ND,0.6ND,0.9ND These three filters adjust exposure without affecting colour balance and can be used with all standard film types.

82mm Wide Adapter Ring for Lens Hood 82mm wide angle adapter ring attaches to lens to accomodate the lens hood.

• Compatible with SW150 Filters
• Fits up to 2x Filters
• Rotating Design This has been specially designed for supported ultra-wideangle lenses and comes assembled with two filter slots and a Lightshield.

• LEE100 Filter System
• Holds up to 3x Filters
• 360° Rotation
• Reduces Reflections & Increases Image Clarity
• Increases Colour & Tonal Saturation
• High quality optical resin
• Kit includes filter holder & 0.6 ND filter

• NIKKOR Z 14-24 f2.8 S Compatibility
• Holder Kit Includes NIKKOR Z 14-24 f2.8 S Holder, 2x Filter Adaptors & Carry Pouch

• ND Neutral Density Filter
• 6 Stop Reduced Exposure
• 64x Filter Factor
• 100 x 100mm (4 x 4) Filter Size
• Allows for Use of Wider Aperture
• For use with Lee Filters 100m Filter Holder At six stops, the Little Stopper is ideal for those low-light conditions at the beginning and end of the day (when the Big Stopper's ten stops may prove too much), allowing you to enjoy increased flexibility with exposure lengths.

77mm Adapter Ring for Lens Hood Adaptor rings fit into the lens to accommodate the filter holder. Once the adaptor is in place the filter holder clips firmly to it using a smooth, quick-release, spring loaded mechanism.

• LEE100 Filter System
• Holds up to 3x Filters
• 360° Rotation
• Reduces Reflections & Increases Image Clarity
• Increases Colour & Tonal Saturation
• High quality optical resin
• Kit includes filter holder, big stopper, little stopper & 0.6 ND filter

SW150 Adapter for Nikon AF-S 14-24mm Lens The Adaptor consists of a front ring, a compressor ring and a locking ring specifically designed for the Nikon AF-S Nikkor 14-24mm f/2.8G ED lens.

67mm Adapter Ring for Lens Hood 67mm wide adapter ring sturdily constructed with an aluminum screw thread.

• Snap-On CPL Circular Polarizer Filter
• LEE100 Filter Holder Compatibility
• 1.5 Stop Reduced Exposure
• 2.8x Filter Factor
• Reduces Reflections & Increases Image Clarity
• Increases Colour & Tonal Saturation
• High quality optical glass

77mm Wide Adapter Ring for Lens Hood Adaptor rings fit into the lens to accommodate the filter holder. Once the adaptor is in place the filter holder clips firmly to it using a smooth, quick-release, spring loaded mechanism.

• CPL Circular Polarizer Filter
• Prevents Reflection & Glare
• Increases Colour & Tonal Saturation
• 105mm Diameter Thread
• Reduces Reflections & Increases Image Clarity

• Lens Caps for Lee Adapter Ring
• Protects Adapter Ring and Lens While Changing Filters This lens cap allows you to leave the adaptor ring attached at all times whilst keeping the front element clean and safe.

• CPL Circular Polarizer Filter
• Prevents Reflection & Glare
• Increases Colour & Tonal Saturation
• 82mm Diameter Thread
• Reduces Reflections & Increases Image Clarity

• Multi-Filter Pouch
• Holds up to 10x Filters

• CPL Circular Polarizer Filter
• Prevents Reflection & Glare
• Increases Colour & Tonal Saturation
• 150 x 150mm (6 x 6) Filter Size
• For use with Lee Filters SW150 Mark II Filter Holder If used alone, the polariser can be placed into the filter holder and the holder rotated until the desired effect is achieved. If used with a grad filter, the grad should be positioned first, then the polariser added.

• Shields Lens From Glare
• Rotates Independently