Marshall Electronics Compact 8MP UHD Camera CS/C-mount with ability to output HD60/UHD30 (6G/3G-SDI/HDMI-1.4) TRS Stereo

CV380-CS  Compact 8MP 4K Camera (4K/UHD 30fps)

The CV380-CS can shoot in resolutions up to 3840 x 2160p and has been designed to be small and compact for those applications where larger cameras can’t go.

The CV380-CS uses an 8.5-Megapixel, 1/2.5-inch sensor and has 6G/3G/HD-SDI and HDMI 1.4 outputs. This makes it very suitable for use in live broadcast environments such as sporting events, where it can be placed in hard to reach positions to capture unique angles and perspectives.

Key Features:

• 6G-SDI (single-BNC) & HDMI 1.4 outputs

• 1/2.5-inch 8.5 MP Sony sensor
• 4K: 4096 x 2160p @ 30, 29.97, 25, 24 fps 
• UHD: 3840 x 2160p @ 30, 29.97, 25, 24 fps 
• HD: 1080p @ 60, 59.94, 50, 30, 29.97, 25, 24 fps 
• HD: 1080i / 720p @ 60, 59.94, 50 fps
• CS/C lens mount with DC Auto/Manual Iris
• Remote adjustable via RS485 Visca protocols

The camera offers three resolution modes with the following frame rate settings:

• UHD (3840 x 2160p) at 25, 29.97, and 24 fps
• Progressive HD (1080p and 720p)at50, 59.94, 25, 29.97, and 24 fps
• Interlaced HD (1080i) at 50, 59.94, and 60 fps

The CV380-CS features manual adjustments for settings including white balance, gamma, gain, pedestal and digital zoom. It can also be remotely matched and adjusted using the RS485 (Visca).

As far as lenses go, the CV380-CS has a varifocal or fixed CS/C lens mount with DC Auto-Iris capability and can accept a range of interchangeable lenses depending on your application. If you aren’t familiar with CS/C lens mount, they are commonly found on 16 mm movie cameras, closed-circuit television cameras, machine vision cameras and microscope phototubes. C-mount lenses were originally made for use on 8 mm and 16 mm film cameras and the 1/3″, 1/2″, 2/3″, 1″, and 4/3″ video formats.

The body of the CV380-CSs has been fully redesigned, with special attention given to enhancing durability in the field with the addition of new structural wings that are there to provide greater protection for rear connectors during use.