Zacuto Dual Trigger Grip Base

Dual Trigger Grip Base

The Dual Trigger Grip Base is the first thing you need to build your dual grips.  It acts as a “double sleeve” and you can pick your two handgrips; Zacuto's classic wooden grip to the left side for balance, comfort and flexibility and a camera specific grips to the right side for camera controls at your fingertips.

The Dual Trigger Grip Base slides onto 15mm lightweight rods. They allow for single-handed 360° rotation with the simple press of a trigger. The two handles rotate independently of each other. Flip them down for a low, rock-solid handgrip. Raise it up for more of an Aaton style position, quickly flip them both all the way up to set your camera flat on the ground or for storing in a case. You can also stagger them if that is more comfortable to you. The length of the handgrips can also be adjusted- they can go from 13” to 16” measuring from the base to the bottom of the handgrip.

Options for building your Dual Trigger Grips:

Right Side:

• Wooden Trigger Grip- gives you a classic wooden handgrip
• EVA1 Trigger Grip- relocates the Panasonic EVA1 camera grip 
• Rosette Trigger Grip- relocates the Canon C200, Canon 18-80, Blackmagic Ursa, Panasonic Varicam LT, Tilta Nucleus M Hand unit, or any other Rosette based camera grip
• Canon C100, C300, and C500 Grip- relocates the Canon C100 series, C300 series or C500 camera grip
• Sony FS5- relocates the Sony FS5 series camera grip

Left Side: 

• Wooden Trigger Grip- gives you a classic wooden handgrip