DJI Inspire 2 Advanced Kit with Zenmuse X5S Gimbal & MFT 15mm/1.7 ASPH Lens

Inspire 2

Power Beyond Imagination

The Inspire 1 was a revelation. The first filmmaking drone in the world to integrate an HD video transmission system, 360 rotating gimbal & a 4K camera, as well as the simplicity of app control.

Key Features:

• 23-27 mins Flight Time
• 7 km (4.3 mi) Control Range
• 30 m (98.4') Sensory Range
• 94 kmph (58 mph) Speed
• 6K/5.2K Video Resolution
• 1080P Live View

The launches of the Zenmuse X5 & X5R cameras further cemented the Inspire as a critical tool for filmmakers around the globe. The Inspire 2 takes everything that was good about the Inspire 1 & improves it.

An all-new image processing system records at up to 5.2K in CinemaDNG RAW, Apple ProRes & more. It goes from 0 to 50 mph (80 kmph) in just 5 seconds & hits a max. speed of 58 mph (80 kmph). It also has a max. descent speed of 9m/s for unheard of speed & agility in an aircraft this size.

A dual battery system prolongs the flight time to a max. of 27 minutes (with an X4S), which self-heating technology allows it to fly even in low temperatures. Flight Autonomy has been revised and developed specifically for the Inspire 2, providing two directions of obstacle avoidance & sensor redundancy.

Increased intelligence adds multiple intelligent flight modes including Spotlight Pro, which gives even single pilots the ability to create complex, dramatic shots. An upgraded video transmission system is now capable of dual signal frequency & dual channel, which enables simultaneous streaming of video from an onboard FPV camera & the main camera for better pilot & camera operator collaboration.

Aircraft

• Structure: Magnesium, aluminum composite shell & transforming design with carbon fibre arms.
• Configuration: Vision sensing, 2-axis FPV camera, range of supported cameras.
• Propulsion: 58 mph(94 kmph) max. speed, 2 kg thrush per rotor, 15" props, max. 27 min flight time (w/X4S).
• Battery: Dual battery, self-heating, battery redundancy, 98 Wh

Image System

• Image Processing & storage: 5.2K @ 4.2 Gbps RAW video recording, CineCore 2.0, integrated DJI CineSSD.
• Video Format: CinemaDNG & Apple ProRes 5.2K video support, H.265 & H.264 video codec support, 4K video at 100 Mbps. Recorded video can be stored simultaneously on the DJI CineSSD & a Micro-SD card.
• File System: FAT32/exFAT universal file system. 

Remote Controller

• Signal frequency switching between 2.4 GHz & 5.8 GHz.
• Controllable range: 7 km (4.3 miles)
• Master-slave mode: Multiple slave controllers supported
• Ports: Extension port, HDMI port, USB port

Professional Image Quality

• CinemaDNG: 5.2K (5280x2972, 16:9) 30 fps 12bit, 4.2 Gbps / 4K (4096x2160, 17:9) 60 fps 10bit, 4.0 Gbps
• Apple ProRes: 5.2K (5280x2160, 2.4:1) 30 fps (422 HQ) / 4K (3840x2160, 16:9) 30 fps (4444 XQ, no alpha)
• H.265/H.264: Built-in 3D noise reduction, 3DLUT Colour management technology, advanced sensor correction
• H.264/AVC BP/MP/HP Level 5.1: 4K 60 fps, 100 Mbps
• H.265 MP Level 5.1: 4K 30 fps, 100 Mbps
• Stills: 4x JPEG/DNG/JPEG+DNG 14 fps in burst 20.8MP / 5x DNG 20 fps continuous burst 20.8MP

Efficient Workflow

The Inspire 2 creative workflow has been completely optimized and is now capable of recording video in CinemaDNG , Apple ProRes & other common formats for post-production in filmmaking. It also supports FAT 32/exFAT file systems, which allow fast copying of files directly from the CineSSD without additional software.

Sense & Avoid

Forward & downward vision systems enable the Inspire 2 to detect obstacles up to 30 m ahead, allowing for protected flight at up to 34 mph (54 kmph) at a controllable attitude angle of 25°. Upward facing infrared sensors scan obstacles 5 m (16') above adding protection when flying in enclosed spaces. Obstacle sensing systems are active during normal flight, RTH & all Intelligent Flight Modes. These sensors are core components of the DJI Flight Autonomy system, which brings the below intelligent features to the Inspire 2.

Spotlight Pro

Spotlight Pro is a powerful tracking mode that allows even single pilots to capture complex, dramatic images. It uses advanced visual tracking algorithms to lock onto a subject during flight, regardless of the direction that the Inspire 2 flies, creating shots that would once have required a dedicated camera operator. If the gimbal comes close to reaching its rotation limits, the Inspire 2 itself will rotate in the same direction without affecting flight control or the shot being captured to free up gimbal movement.

Spotlight Pro has 2 shooting modes, Quick Mode & Composition Mode. In Quick Mode, select an object to begin tracking. In Composition Mode, select the subject and the tracking position. When the subject enters the preset tracking position, press the shortcut to begin tracking. The gimbal can be moved during shooting for composition adjustments. Spotlight Pro is available in all Intelligent Flight Modes including ActiveTrack, TapFly, Waypoint & Point of Interest.

Intelligent Flight Modes

In addition to Spotlight Pro, a range of other intelligent flight & shooting modes are available. Obstacle avoidance is optimized when using Point of Interest & Waypoint modes, making complex shots simple & repeatable. Also available are QuickSpin, TapFly & ActiveTrack to simplify challenging shots.

TapFly

The 2-axis onboard FPV camera separates the flight view from the main camera view, effectively giving the inspire 2 a dedicated TapFly camera. Tap a point onscreen in the FPV view to set a flight route and the Inspire 2 will automatically fly along that route, leaving the pilot to focus on gimbal movement.

ActiveTrack

The ActiveTrack Mode allows the Inspire 2 to recognize a range of objects from people, bikes, cars, boats. Tracking profiles that can be adjusted based on the subject being tracked means greater tracking precision.

Smart return to home

Forward & downward vision systems allow the Inspire 2 to create a real-time map of its flight route as it flies. If the video transmission system signal is lost & Smart Return Home is enabled, it is able to fly home along its original route & change to a straight line when it regains a signal. As it returns, it will use the primary camera to identify obstacles as far as 200m in front, allowing it to plan a safe route home. It is also able to reconnect more quickly after losing connection.

Optimized Transmission & Control System

The latest update to DJI Lightbridge technology has an effective transmission distance of up to 7 km (4.3 mi) & is capable of delivering both 1080p/720p video as well as the FPV view to pilot & camera operator. Users can also switch between 2.4 GHz & 5.8 GHz control frequencies to cut through noise for greater signal stability.

Master & Slave Controllers

A new wireless HD image transmisison technology sends video information from the master controller to the slave controller. The two controllers can be up to 100m apart without the loss of image quality.

Broadcast mode

Broadcasters can broadcast direct from the Inspire 2 using its dedicated 1080i50 & 720p60 transmission signal. Aerial live-streaming direct to TV is as simple as connecting the Inspire 2 remote controller to the satellite truck.

Powerful flight performance

A new propulsion system optimized for power creates a new level of flight performance. The Inspire 2 flies at up to 58 mph(94 kmph), descends at 9 m/s & climbs at 6 m/s. It can accelerate from 0 to 50 mph(80 kmph) in just 5 seconds & flies at a max altitude angle of 40 degrees.

The two controller sticks are tuned for more sensitivity, making delivate maneuvers easier. More power also allows the Inspire 2 to fly in more extreme conditions, including over 2500-5000 m above sea level (using optional dedicated propellers) & in temperatures as low as -20 degrees C using self-heating Intelligent Flight Batteries.

Increased Reliability

Reliability has been further enhanced through dual redundancy of key modules such as the IMU & barometer. The intelligent flight control system monitors the redundancy system, giving it accurate flight data.

The new obstacle sensing system helps the Inspire 2 sense & avoid obstacles, minimizing the risk of collision. Dual batteries mean that if a problem occurs on one battery, the other is able to continue flight long enough for a safe landing.

At the same time, the Inspire 2 propulsion system is driven by a PWM signal with serial port signal redundancy so that if PWM signals are lost, transmission will continue through the serial port. This propulsion system has been tested for thousands of hours to ensure reliability, when combined with key sensors & a dual-battery design. Overall flight reliability is significantly enhanced.

Zenmuse X5S Gimbal

Equipped with an updated Micro 4/3 sensor, the Zenmuse X5S has a dynamic range of 12.8 stops with a much improved signal to noise ratio and colour sensitivity than the X5R. It supports up to 8x standard M4/3 lenses (including zoom lenses) with focal lengths ranging from 9mm-45mm (equivalent to 18mm-90mm on a 35mm camera), allowing more creative flexibility.

The new CineCore 2.0 image processing system on the Inspire 2 makes the Zenmuse X5S capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes video as well as 4K 60fps using H.264 and 4K 30fps using H.265 (both at 100Mbps).

Continuous DNG burst shooting at 20fps with 20.8MP images is also supported. The Zenmuse X5S was designed
to keep pace with the rigors of high-end professional aerial imaging.

Inspire 2 Aerial Imaging

Compared with the Inspire 1, the Inspire 2 utilizes an innovative structure that separates the CineCore 2.0 image processing system from the camera and places it inside the aircraft. This means that the sensor and optical system are detachable and easily connected using a newly designed quick-release connector.

Designing the camera system in this way effectively protects the sensor from magnetic interference originating from the processor. It also allows a range of lightweight camera units to be connected as required by different scenes. The uprated M4/3 sensor — and support for interchangeable lenses — allows the Zenmuse X5S to capture high resolution images of incredibly high quality, when combined with the extraordinary CineCore 2.0 image processing system.

Improved Micro 4/3 Sensor

The onboard Micro 4/3 sensor has been upgraded, significantly improving image quality. With a pixel size of 3.4μm, this 20.8-megapixel sensor captures more detail than the previous sensor. It has 12.8 stops of dynamic range as well as a better signal to noise ratio and color sensitivity than the X5R, allowing it to create clear, low noise images in low light environments.

Array of Compatible Lenses

Since it uses a standard Micro 4/3 mount, the Zenmuse X5S now supports up to eight professional lenses with focal lengths ranging from 9mm-45mm (equivalent to 18mm-90mm on a 35mm camera), providing more creative control over the final look of a shot.

Compatible lenses:

• Olympus M.Zuiko 12mm/2.0
• DJI MFT 15mm/1.7 ASPH
• Olympus M.Zuiko 17mm/1.8
• Panasonic Lumix 15mm/1.7
• Olympus M.Zuiko 25mm/1.8
• Panasonic Lumix 14-42mm/3.5-5.6 HD
• Olympus M.Zuiko 45mm/1.8
• Olympus M.Zuiko 9-18mm/4.0-5.6

Hollywood-Grade Video

Using CineCore 2.0, the Zenmuse X5S records video at a maximum resolution of 5.2K/30fps in CinemaDNG 12bit, 5.2K 30fps Apple ProRes 422 HQ and 4K 30fps Apple ProRes 4444 XQ (no alpha)2. Additional recording options include video in 4K/60fps using H.264 or oversampling video in 4K/30fps using H.264/H.265, both with a bitrate of 100Mbps.

Fast, Efficient Workflows

The DJI CINESSD card (PCIe3.0 NVMe SSD support) and a highly optimized FAT32/exFAT file system, allows Zenmuse X5S
footage to be transferred directly through the DJI CINESSD STATION card reader to a computer at high speeds without any additional software. Footage also supports the DIT standard. CinemaDNG or Apple ProRes workflows can be used for post-processing.

Lossless in-Video Single and Burst Photo Capture

Using only the Micro SD card, 20.8MP stills can be captured at 14fps in Burst Mode in JPEG+DNG. Using the DJI CINESSD opens up 20fps continuous DNG Burst Mode with a maximum image resolution of 20.8 megapixels. Stills can also be taken during video recording without interruption.

Enhanced Camera Stabilization

Stabilizing the Zenmuse X5S is a highly optimized 3-axis gimbal with pinpoint-precise motor rotation with a control accuracy of ±0.01° powered by a dedicated processor. Rather than rely on electrical slip rings — as is common with many gimbals — the Zenmuse X5S uses a unique mechanically limited design and concealed wires to ensure
more stable data transmission and greater durability.

Vibration is eliminated using three damping balls and a lightweight damping board, creating seamlessly smooth video.
360° rotation remains possible through gimbal rotation and smooth aircraft yaw. Stable, smooth footage can be captured even when using a 90mm lens.

Long-Range Camera and Focus Control

Take control over every camera setting from afar, including focus, aperture, and format, directly in the DJI GO 4 app.
Precision control also extends to focus, with DJI GO 4 and the optional DJI Focus, offering focus control across the entire transmission range. Using DJI Focus, no additional cables or motors are needed and new Lightbridge technology sends all signals as far as 7 km (4.3 mi) away.